4IPNET OWL800 User Manual
                                                                                                            | |
Contents
| 
User’s ManualOWL800 / OWL2000 / HSG800 ENGLISH© 2008 4IPNET, INC.564.3.3 WDS ConfigurationFor each WDS link profile, the administrators need to remote peer's MAC address and the authentication method forestablishing connection to the peer.Gateway & AP Mode WDS Profile: Total 8 profiles included in the OWL800 device, pull the drop-down menu to select one WDSprofile to configure. WDS: Enable or Disable the specified WDS link. MAC Address of Remote AP: For each link, type the MAC address of the remote peer here. The MAC addressmay also get by WDS Discovery. Please refer to WDS discovery in the following section for detail. Path Cost of STP: An assigned weighted metric here will determine the best path for data flow. Security Type: Set the encryption (WEP or None) of WDS link here.o None: No authentication is required to establish this WDS link.o WEP: Establish the WDS link in WEP authentication which must provides key length, format and thekey itself respectively, recommended.Gateway & AP Mode |
Related manuals for 4IPNET HSG800
manualsdatabase
Your AI-powered manual search engine