Standard Deviation FCM Appendix A Runtime Templates282 3BUR002418-600 Adiscarded. The result is always available, even if too few samples have been taken tomake up the full complement specified at configuration.MAX BAD SAMPLES FieldThis field specifies the maximum number of bad samples allowable and present tostill perform the calculation. Valid entry is any integer from 0 to the value entered onthe NUMBER OF SAMPLES field.Standard Deviation FCMThe Standard Deviation FCM calculates the standard deviation of the input valueover a specified time. The period is synchronized with the real time clock (minutes,hours, and so on).Non-Rate Periodic Total FCMThe Non-Rate Periodic Total FCM determines the total value of the input over aspecified time period. The time period is synchronized with the real time clock(minutes, hours, and so on).Periodic Average FCMThe Periodic Average FCM determines the arithmetic average of an input signalover a selected time period. The time period is synchronized with the real time clock(minutes, hours, shifts, and so on).Periodic Maximum FCMThe Periodic Maximum FCM determines the maximum value of an input signalover a specified time period. The period is synchronized with the real time clock(minutes, hours, shifts, and so on).Periodic Minimum FCMThe Periodic Minimum FCM determines the minimum value of an input signal overa specified time period. The period is synchronized with the real time clock(minutes, hours, and so on).