ABB AC500-S Safety User Manual

Also see for AC500-S: System manual Application note Safety user manual Operation manual

Contents

ABB AC500-S Safety User Manual Manual pdf 167 page image

4.2 WorkflowThe engineering workflow presented in this chapter describes only the steps needed to instantiate, configureand program safety modules and those non-safety modules which are a part of the “black channel” [3] in thesafe communication part. All other non-safety modules are separately covered in PS501 Control Builder PlusV2.2.1 (or newer) / ABB Automation Builder 1.0 (or newer) and AC500 User Documentation.Fig. 63 provides an overview of steps which have to be carried out to successfully configure and programAC500-S Safety PLC.Configuration and programmingWorkflow30.03.2017 AC500-S 167