74 Parameters05.86 DI delayed status atfaultDisplays the DI delayed status (10.02) at which faultoccurred. For the bit list, see parameter 10.02 DI delayedstatus.0b00000b0000...0b1111 DI delayed status at fault. 1 = 105.87 Invertertemperature at faultDisplays the inverter temperature (05.11) at which faultoccurred.--40…160°C Inverter temperature at fault. 1 = 1°C05.88 Reference used atfaultDisplays the reference used (28.01/23.01) at which faultoccurred. The type of the reference depends on the selectedoperation mode (79.10).-0606 Control and statuswordsDrive control and status words.06.01 Main control word The main control word of the drive. This parameter shows thecontrol signals as received from the selected sources (suchas digital inputs, the fieldbus interfaces and the applicationprogram).For the bit descriptions see page 253. The related statusword and state diagram are presented on pages 255 and 256respectively.This parameter is read-only.0x00000x0000...0xffff Main control word. 1 = 1No. Name/Value Description Def/FbEq16Bit Name0 Off1 control1 Off2 control2 Off3 control3 Run4 Ramp out zero5 Ramp hold6 Ramp in zero7 Reset8 Inching 19 Inching 210 Remote cmd11 Ext ctrl loc12 User bit 013 User bit 114 User bit 215 User bit 3
