Installation and start-up 112Installation and start-upWhat this chapter containsThe chapter describes how to install and start-up the Assistant control panel for thefirst time.InstallationAttach the control panel directly to the driveor use a separate mounting kit (forexample, for cabinet door mounting).To attach the control panel,1. place its bottom end into the bottom ofthe slot in the drive (A),2. pivot the control panel and push theupper part (B) until you hear a click.To detach the control panel,1. release the control panel by pressingthe clip (B),2. pull the upper end of the control panelout of the slot in the drive.AB