Functions in the Options menu 436Functions in the OptionsmenuWhat this chapter containsThe chapter describes functions in the Options menu.Options menuIn the Options menu, you can control the settingsrelated to the Home view.The Options menu has the following sub-menus:• Reference: Set the reference value byusing and . The changes take placewhen you save them with a key press. See Setting the reference (page 44).• Direction change: Change the direction of the motor’s rotation in local controlmode.• Select drive: Enable or disable the panel bus. If enabled, view the status ofdrives in the panel bus and select which drive to control with the control panel.See chapter Control of multiple drives (page 47).• Edit Home view: Edit the contents of the Home view. See Editing thecontents of the Home view (page 44).• Active faults: View an active faults. See chapter Fault tracing (page 51).• Active warnings: View an active warnings. See chapter Fault tracing (page51).