ABB ACS150 User Manual

Also see for ACS150 series: User manual User manual User manual Installation instructions Installation instructions

Contents

ABB ACS150 User Manual Manual pdf 116 page image

Technical data116Ambient conditionsEnvironmental limits for the drive are given below. The drive is to be used in a heatedindoor controlled environment.Operationinstalled for stationary useStoragein the protective packageTransportationin the protective packageInstallation site altitude 0 to 2000 m (6600 ft) abovesea level[above 1000 m (3300 ft), seesection Derating on page110]- -Air temperature -10 to +50∞C (14 to 122∞F).No frost allowed. See sectionDerating on page 110.-40 to +70∞C (-40 to +158∞F) -40 to +70∞C (-40 to +158∞F)Relative humidity 0 to 95% Max. 95% Max. 95%No condensation allowed. Maximum allowed relative humidity is 60% in the presence ofcorrosive gases.Contamination levels(IEC 60721-3-3,IEC 60721-3-2,IEC 60721-3-1)No conductive dust allowed.According to IEC 60721-3-3,chemical gases: Class 3C2solid particles: Class 3S2.The ACS150 must beinstalled in clean airaccording to enclosureclassification. Cooling airmust be clean, free fromcorrosive materials andelectrically conductive dust.According to IEC 60721-3-1,chemical gases: Class 1C2solid particles: Class 1S2According to IEC 60721-3-2,chemical gases: Class 2C2solid particles: Class 2S2Sinusoidal vibration(IEC 60721-3-3)Tested according toIEC 60721-3-3, mechanicalconditions: Class 3M42Ö9 Hz, 3.0 mm (0.12 in.)9Ö200 Hz, 10 m/s2 (33 ft/s2 )- -Shock(IEC 60068-2-27, ISTA 1A)- According to ISTA 1A.Max. 100 m/s2 (330 ft/s 2),11 ms.According to ISTA 1A.Max. 100 m/s 2 (330 ft/s 2),11 ms.Free fall Not allowed 76 cm (30 in.) 76 cm (30 in.)MaterialsDrive enclosure ï PC/ABS 2 mm, PC+10%GF 3 mm and PA66+25%GF 2 mm, all in color NCS 1502-Y(RAL 9002 / PMS 420 C)ï hot-dip zinc coated steel sheet 1.5 mm, thickness of coating 20 micrometersï extruded aluminium AlSi.Package Corrugated cardboard.Disposal The drive contains raw materials that should be recycled to preserve energy and naturalresources. The package materials are environmentally compatible and recyclable. Allmetal parts can be recycled. The plastic parts can either be recycled or burned undercontrolled circumstances, according to local regulations. Most recyclable parts are markedwith recycling marks.If recycling is not feasible, all parts excluding electrolytic capacitors and printed circuitboards can be landfilled. The DC capacitors contain electrolyte and the printed circuitboards contain lead, both of which are classified as hazardous waste within the EU. Theymust be removed and handled according to local regulations.For further information on environmental aspects and more detailed recycling instructions,please contact your local ABB distributor.