ABB ACS800-07-0610-3 Hardware Manual

Also see for ACS 800 Series: User manual Hardware manual Hardware manual Hardware manual Installation guide

Contents

ABB ACS800-07-0610-3 Hardware Manual Manual pdf 102 page image

Motor control and I/O board (RMIO)96Relay outputsThree programmable relay outputsSwitching capacity 8 A at 24 VDC or 250 VAC, 0.4 A at 120 VDCMinimum continuous current 5 mA rms at 24 VDCMaximum continuous current 2 A rmsIsolation test voltage 4 kVAC, 1 minuteDDCS fibre optic linkWith optional communication adapter module RDCO. Protocol: DDCS (ABBDistributed Drives Communication System)24 VDC power inputVoltage 24 VDC ± 10%Typical current consumption(without optional modules)250 mAMaximum current consumption 1200 mA (with optional modules inserted)The terminals on the RMIO board as well as on the optional modules attachable to the board fulfil the Protective ExtraLow Voltage (PELV) requirements stated in EN 50178 provided that the external circuits connected to the terminals alsofulfil the requirements and the installation site is below 2000 m (6562 ft). Above 2000 m (6562 ft), see page 68.Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com