152 Additional parameter dataTerms and abbreviationsFieldbus addressesRefer to the User’s manual of the fieldbus adapter.Term DefinitionActual signal Signal measured or calculated by the DC/DC converter unit. Usually can only bemonitored but not adjusted; some counter-type signals can however be reset by enteringthe value 0.Analog src Parameter can be set to the value of another parameter by choosing Other, and selectingthe source parameter from a list.In addition to the Other selection, the parameter may offer other pre-selected settings.Binary src Value of the parameter can be taken from a specific bit in another parameter value(Other). Sometimes the value can be fixed to 0 (False) or 1 (True).In addition to the Other, False and True selections, the parameter may offer other pre-selected settings.Data Data parameter.FbEq32 32-bit fieldbus equivalent: Scaling between the value shown on the panel and the integerused in fieldbus communication when a 32-bit value is selected for transmission to anexternal system.Corresponding 16-bit scalings are listed in chapter Parameters (page 45).List Selection list.No. Parameter number.PB Packed boolean.RealType Data type. See Analog src, Binary src, List, PB, Real.16-bit value 16-bit value (31 bits + sign)= integer value = fractional value
