AquaProbe FEA100 / FEA200Electromagnetic flowmeter – insertion-type flow sensors 3 Mechanical Installation10 OI/FEA100/200–EN Rev. D3.3 Location – Flow ConditionsThe flow sensor can be installed in one of two positions in the pipe: on the centre lineor at the mean axial velocity point (1 /8 pipe diameter)It can also be traversed across the pipe to determine the velocity profile.Note. Ensure the sensor is installed in the pipe so the flow direction arrow on the flow sensor casematches the pipe flow.Fig. 3.2 Flow Conditions5 Diameters See Table 3.1, Page 11
