ABB AquaProbe FEA100 User Manual

Also see for AquaProbe FEA100: User guide

ABB AquaProbe FEA100 User Manual Manual pdf 6 page image

AquaProbe FEA100 / FEA200Electromagnetic flowmeter – insertion-type flow sensors 1 Safety4 OI/FEA100/200–EN Rev. D1.4 Product Recycling Information ((European customers only)The equipment is protected through double insulation.This symbol, when noted on a product, indicates a potential hazard which could cause seriouspersonal injury and/or death.The user should reference this instruction manual for operation and/or safety information.This symbol, when noted on a product enclosure or barrier, indicates that a risk of electricalshock and/or electrocution exists and indicates that only individuals qualified to work withhazardous voltages should open the enclosure or remove the barrier.This symbol indicates that the marked item can be hot and should not be touched without care.This symbol indicates the presence of devices sensitive to electrostatic discharge and indicatesthat care must be taken to prevent damage to them.This symbol identifies a risk of chemical harm and indicates that only individuals qualified andtrained to work with chemicals should handle chemicals or perform maintenance on chemicaldelivery systems associated with the equipment.This symbol indicates the need for protective eye wear.This symbol indicates the need for protective hand wear.Electrical equipment marked with this symbol may not be disposed of in European publicdisposal systems. In conformity with European local and national regulations, Europeanelectrical equipment users must now return old or end-of-life equipment to the manufacturer fordisposal at no charge to the user.Products marked with this symbol indicates that the product contains toxic or hazardoussubstances or elements. The number inside the symbol indicates the environmental protectionuse period in years.ABB is committed to ensuring that the risk of any environmental damage or pollution caused byany of its products is minimized as far as possible. The European Waste Electrical and ElectronicEquipment (WEEE) Directive that initially came into force on August 13 2005 aims to reduce thewaste arising from electrical and electronic equipment; and improve the environmentalperformance of all those involved in the life cycle of electrical and electronic equipment.In conformity with European local and national regulations, electrical equipment marked with theabove symbol may not be disposed of in European public disposal systems after 12 August2005.Note. For return for recycling, please contact the equipment manufacturer or supplier for instructions onhow to return end-of-life equipment for proper disposal.