Connecting the serial interface731SVC 440 795 M1100Figure: 57: Plugging and unplugging cablesConnecting the serialinterfaceThe display base module is provided with a multi-functioninterface. This can be used to set up point-to-pointcommunication between different devices. The interface isalso used for connecting the CL-LAD.TK001 connecting cable.This enables a display system to be connected with anotherone.The serial interface must be implemented using specialcables.The standard CL-LAD.TK006 cable is 5 m in length.1 23h The CL-LAD.TK006 cable must not be lengthened in orderensure compliance with EMC regulations.
