Commissioning861SVC 440 795 M1100WiringThe display system displays a small arrow l in the circuitdiagram when creating the wiring.Press ALT to activate the wiring arrow cursor and use thecursor buttons Í Ú ú í to move it.The wiring arrow works between contacts and relays. Whenyou move the arrow onto a contact or relay coil, it changesback to the cursor and can be reactivated if required.X Press ALT to wire the cursor from I 02 through to thecoil field.The cursor changes into a flashing wiring arrow andautomatically jumps to the next logical wiring position.X Press the cursor button í. Contact I 02 will be connectedup to the coil field.h ALT also has two other functions depending on the cursorposition:• In the left contact field, you can press ALT to insert anew empty circuit connection.• The contact under the cursor can be changed betweena N/O and N/C contact by pressing the ALT button.ÊÊÊÊÊÊÊ-ÊÊÊÊÊÊÊ-ÊÊÊÊlÊÊ-ÊÊÊÊÊÊÊ-ÊÊÊÊÊÊÊ-ÊÊÊÊÊÊÊ-L: 1 C:1 B:7944MlLmh The display system automatically connects adjacentcontacts up to the coil.-I 02 lL: 1 C:3 B:7944h You can use DEL to erase a connection at the cursor orarrow position. Where connections intersect, the verticalconnections are deleted first, then, if you press DEL again,the horizontal connections are deleted.
