Safety instructions93ADW000462R0401 DCS880 Hardware manual e dSafety instructionsWhat this chapter containsThis chapter contains the safety instructions which you must follow when installing,operating and servicing the drive. If ignored, physical injury or death may follow, ordamage may occur to the drive, the motor or driven equipment. Read the safetyinstructions before you work on the unit.To which products this chapter appliesThe information is valid for the whole range of the product DCS880, the convertermodules DCS880-S0x size H1 ... H8, field exciter units DCF80x, etc. like the RebuildKit DCS880-R00.Use of warnings and notesThere are two types of safety instructions throughout this manual: warnings andnotes. Warnings caution you about conditions which can result in serious injury ordeath and/or damage to the equipment and advice on how to avoid the danger.Notes draw attention to a particular condition or fact, or give information on asubject. The warning symbols are used as follows:Dangerous voltage warning warns of high voltage which can causephysical injury and/or damage to the equipment.General danger warning warns about conditions, other than thosecaused by electricity, which can result in physical injury or death and/ordamage to the equipment.Electrostatic sensitive discharge warning warns of electrostaticdischarge which can damage the equipment.
