2.10 Water & Air unit2.10.1 Installation of Water and air unitLocation of the Water and Air unitThe Water and Air unit is located on top of the robot base.General technical dataThe table below shows technical data of the water and air pressure:ValueParameterMax. 0.6 MPa / 87 PSIWater operating pressureMax. 1.0 MPa / 145 PSIAir operating pressureThe table below shows technical data for water and air quality:ValueParameterNormal filtered industrial water quality, 80 to100 mesh.Water qualityUse clean air.Air qualityWhen there is excessive condensate, installa device that will eliminate water, such as adryer or water separator (Drain Catch) on theinlet side of the air filter.Continues on next pageProduct manual - DressPack/SpotPack IRB 8700 1233HAC055802-001 Revision: B© Copyright 2015-2017 ABB. All rights reserved.2 Installation2.10.1 Installation of Water and air unit
