ABB IRB 7600 - 500/2.55 Product Manual

Also see for IRB 7600 - 150/3.5: Product manual

Contents

ABB IRB 7600 - 500/2.55 Product Manual Manual pdf 225 page image

3.6 Service Information System, M20003.6.1 Using the SIS systemGeneralThis is a brief description of how to use the Service Information System, SIS forM2000 robot systems. Details may be found in:• Service Information System, SIS• Defining the SIS input parameters• Setting the SIS parameters• Importing/exporting SIS data• Reading the SIS output logsThe section is only valid for M2000 systems. For information regarding M2004robot systems, see additional documentation, Operating manual - ServiceInformation System. Article number is specified in section References on page 10.Basic procedureReferenceActionThese are described in Description ofService Information System (SIS) onpage 226.Determine which of the system functionsyou require.1Recommendations on how to define theseare given in SIS system parameters onpage 229.Define what values are adequate and suit-able for your application in your productionenvironment.2How to do this is detailed in Setting theSIS parameters on page 231.Enter these parameters in the system.3Run the robot in normal operation.4The TPU displays for resetting any SISvalue are shown in Description of ServiceInformation System (SIS) on page 226.Reset the counter if a repair is made, or if acounter for any other reason is restarted.5How to access this is detailed in Readingthe SIS output logs on page 233.When a time limit, set in the parameters, isexceeded, a message may be read on theTech Pendant Unit (TPU).6These are described in Exporting the SISdata on page 234.If the log containing the message is to beavailable from an external PC, or if the SISparameters are to be entered from an extern-al PC, a set of software tools are availableto build such an application.73HAC022033-001 Revision: M 225© Copyright 2007-2013 ABB. All rights reserved.3 Maintenance3.6.1 Using the SIS system