ABB PVS-175 Series Hardware Manual

Also see for PVS-175 Series: Hardware manual

Contents

ABB PVS-175 Series Hardware Manual Manual pdf 31 page image

• The MVS is built to fit inside an ISO 20 HC (1AAA according to ISO 3874) type shippingcontainer. It can be transported on a dedicated sea container trailer using the standardcontainer attachment system.• If you are not using a dedicated sear container trailer, lay the MVS directly on thetransportation chassis to prevent sliding and to keep the total height to the minimumpossible level. Use friction enhancement mats (rubber) below the MVS. The maximumthickness of the mat should not be greater than three cm.• For maritime/sea transportation, the maximum values considered are:• Stacking load - 96.000 kg• Racking load - 75 kN• Tare weight - 3100 kg• Gross weight - 19.000 kg.• Fasten the MVS firmly onto the chasis using heavy duty straps.￭ Incoming inspection at arrival• Visually check for any potential transportation damage(s). If any damages found, markand record them and immediately inform your local ABB representative or your ABBsales contact.• Repair any damaged paint. See section, Maintenance of painted surfaces (page 62).• Check that the MVS corresponds to the delivery list and order. Record the deviations(if any) and immediately inform your local ABB representative or ABB sales contact.Storing, lifting and transporting 31