ABB PVS-175 Series Hardware Manual
Also see for PVS-175 Series: Hardware manual
                                                                        | |
Contents
| 
Maintenance of painted surfacesWARNING!Obey the Safety instructions (page 9) and the local safety regulations. If ignored,physical injury or death, or damage to the equipment may occur.WARNING!Obey the Safety instructions (page 9), requirements and specifications of theprimer and paint manufacture.￭ Repainting the scratched areasTools and materialsUse the following tools and materials. If the listed tools are not available in your local market,you can use products with similar characteristics approved by a qualified technician, andget approval from ABB.MakeSpecificationToolSilver P80 Triton1 udFlap DiscBosch1 udGrinding machineEhs10 udFlexible abrasive sponges-250 mlDegreasing spraysFinissage, Impa1 udBody shop putties-200 grRags or blower-10 udDisposable glovesUvex Astrospec1 udSafety glasses-2 udMasks-2 udBrushesMaper500 grEpoxy primerMaper500 grAliphatic polyurethanePainting the damaged surface (no visible rust)If there is damage(s) to the paint surface, but no damages to the metal surface (i.e. novisible rust), then follow these instructions:1. Clean the damaged area first with a suitable detergent and clean water.2. Let the surface dry completely and keep it clean.3. Apply the first layer of paint to the damaged area. Let it dry thoroughly for at least 12hours.4. Apply the second layer of paint to the damaged area.Painting the damaged surface (visible rust)If the damage extends to the metal surface or there is visible rust:1. Remove the rust with sandpaper/polishing disk.62 Maintenance |
Related manuals for ABB PVS-175 Series
manualsdatabase
Your AI-powered manual search engine