9.2.7.9 Event functionMain menu/Settings/General settings/Monitoring/EventFunction/EVENT:xThe Event function menu consists of several sets of settable parameters EVENTwhere the SPA channel mask, LON channel mask, Event mask and minimumrepetition interval can be set.9.2.7.10 Logical signal status report BINSTATREPMain menu/Settings/General settings/Monitoring/BinarySignalStatusReport/BINSTATREP:xThe Binary signal status report BINSTATREP settings consist of some sets ofsettable parameters with one settable parameter per instance.9.2.7.11 IEC 60870–5–103Main menu/Settings/General settings/Monitoring/IEC 60870–5–103The IEC 60870–5–103 part of the settings menu is divided into two separatesubmenus. These are Measurements and Disturbance report. In the Measurementsmenu there are four sets of measurement settings, one with standard settings andthree with user defined settings. The standard settings include some standardservice value thresholds.In the Disturbance report menu Binary signal parameters on up to 96 channels areconfigured.9.2.8 Metering9.2.8.1 OverviewUnder metering there are settings for the Pulse counter function. There are someinstances of the Pulse counter function. Each instance can be switched on or offand a number of parameters can be adjusted.9.2.8.2 Pulse counter logic PCGGIOMain menu/Settings/General settings/Metering/PulseCounter(PCGGIO)/PCGGIO:xIn the Pulse counter PCGGIO folder there are a number of instances of the pulsecounter function PCGGIO. Each instance has a setting and some settableparameters. The setting Operation is used to turn the function on or off. Theparameters are adjusted to change cycle times, pulse counter criteria and the like.Section 9 1MRK505209-UEN ERead and change settings54Operator's manual
