Displays some instances of CCRBRF with several settings per instance. Settingsinclude operation, base current, function mode, operation mode of retrip logic, timedelays and several others.9.3.3.3 Breaker failure protection, single phase version CCSRBRFMain menu/Settings/Setting group N/Current protection/BreakerFailure1Ph(RBRF,50BF)/CCSRBRF:xIn this view available numbered instances of CCSRBRF with a number of settingsper instance. These include Operation, base current, function mode, retrip modeand various time settings.9.3.3.4 Capacitor bank protection CBPGAPCMain menu/Settings/Setting Group N/Current protection/CapacitorBankProtection(GAPC)/CBPGAPC:xDisplays some instances of CBPGAPC.9.3.3.5 Directional over-power protection GOPPDOPMain menu/Settings/Setting Group N/Current protection/DirOverPowerProtection(PDOP,32)/GOPPDOP:xIncludes power, angle and calibration factor settings.9.3.3.6 Directional under-power protection GUPPDUPMain menu/Settings/Setting Group N/Current protection/DirUnderPowerProtection(PDUP,37)/GUPPDUP:xIncludes power, angle and calibration factor settings.9.3.3.7 Four step phase overcurrent protection OC4PTOCMain menu/Settings/Setting Group N/Current protection/PhaseOverCurrent4Step(PTOC,51_67)/OC4PTOC:xDisplays some instances of OC4PTOC each with several settings. The settingsrange from base current and voltage settings to parameters for customerprogrammable curves.9.3.3.8 Thermal overload protection, two time constants TRPTTRMain menu/Settings/Setting Group N/Current protection/ThermalOverload2TimeConst(PTTR,49)/TRPTTR:xSection 9 1MRK505209-UEN ERead and change settings58Operator's manual
