ANSI04000137-3-en.vsdACTIVEUNSUCCLREADY3PT23PT3WAITCBREADYTRSOTFRESETBLKOFFBLKONOFFON BLOCKEDSETONINPROGR3PT4SYNCINHIBITTerminal ‘‘ Master ”Priority = HighSMBRREC (79)WAITTerminal ‘‘ Slave ”Priority = LowCB1CB2WFMASTERWFMASTER*) Other input/output signals as in previous singlebreaker arrangementsPLCLOSTSUCCLSKIPHSRSTCOUNTTHOLHOLDPERMIT1PPREP3P3PT12PT11PT13PT5RESETBLOCKOFFBLKONOFFONINHIBITPLCLOSTSKIPHSCBREADYSYNCTHOLHOLDTRSOTF3PT23PT33PT4PERMIT1PPREP3P3PT12PT11PT13PT5ACTIVEUNSUCCLREADYBLOCKEDSETONINPROGRxxSUCCLRIRI_HS CLOSEMD52aRIRI_HS CLOSEMD52aSMBRREC (79)ANSI04000137 V3 EN-USFigure 119: Additional input and output signals at multi-breaker arrangement. Theconnections can be made "symmetrical" to make it possible to controlthe priority by the settings, Priority: High/Low14.2.3.2 Auto recloser settings GUID-74980A07-CF89-488F-AB17-E5351D0032EE v1The settings for the auto recloser are set using the local HMI (LHMI) or PCM600.This setting guideline describes the settings of the auto recloser using the LHMI.The settings for the auto recloser are found under Main menu/Settings/IED Settings/Control/AutoRecloser(79,5(0->1))/SMBRREC(79,5(0->)):X and have been dividedinto four different setting groups: General, CircuitBreaker, DeadTime and MasterSlave.1MRK 511 401-UUS A Section 14ControlBay control REC670 2.2 ANSI 345Application manual
