8.7 ABB Product Data RegistrationThe ABB Product Data Registration feature traces composition changes related tothe IED's SW or HW.After a composition change, an LCT indication is seen on the LHMI at the IED start-up. At this point, PCM600 should be connected to the IED as it reads the changeddata from the IED. The LCT indication is cleared in the same way as other indications.If PCM600 is not connected to the IED, the indication is seen again after the IED'sreboot.A071266 V2 ENFigure 76: LCT indicationThe number of composition changes can be seen from the Composition changesparameter in Main Menu/Monitoring/IED status.Section 8 1MRS756708 ACommissioning112 615 seriesOperation Manual
