10.2.2 Application GUID-70B268A9-B248-422D-9896-89FECFF80B75 v1Group alarm logic function ALMCALH is used to route alarm signals to differentLEDs and/or output contacts on the IED.ALMCALH output signal and the physical outputs allows the user to adapt thealarm signal to physical tripping outputs according to the specific applicationneeds.10.2.3 Setting guidelines GUID-0BDD898A-360B-4443-A5CF-7619C80A17F4 v2Operation: On or Off10.3 Logic for group alarm WRNCALH10.3.1 Identification GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v4Function description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberLogic for group warning WRNCALH - -10.3.1.1 Application GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1Group warning logic function WRNCALH is used to route warning signals toLEDs and/or output contacts on the IED.WRNCALH output signal WARNING and the physical outputs allows the user toadapt the warning signal to physical tripping outputs according to the specificapplication needs.10.3.1.2 Setting guidelines GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2OperationOn or Off10.4 Logic for group indication INDCALH10.4.1 Identification GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v4Function description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberLogic for group indication INDCALH - -Section 10 1MRK 505 383-UEN ALogic200 Breaker protection REQ650 2.2 IECApplication manual
