ABB TZID-C110 Short Manual

Also see for TZIDC-110: Operating instructions Commissioning instructions Commissioning Instruction Operating instructions Commissioning instructions

Installing and commissioning41/18-77 EN Installing and commissioning 23- Release MODE and ENTER.- is displayed.4. Select parameter 3.2 "Zero position”:- Press and hold MODE .- In addition, 2 x briefly press .- is displayed.- Release MODE .5. Change parameter setting:- Briefly press to select "CTCLOCKW".6. Change over to parameter 3.3 "EXIT" and save the new setting:- Press and hold MODE .- In addition, 1 x briefly press .- is displayed.- Release MODE .- Briefly press to select "NV_SAVE.- Press and hold ENTER until the displayed countdown from 3 to 0 has run down.The positioner saves the new settings and automatically returns to the operating level.7. Return to the remote level.- Press and hold MODE and ENTER.- Wait until the countdown has run down from 3 to 0 .- Release MODE and ENTER.The display indicates the position in % and REMOTE.See Appendix A for an overview of the operation and the parameter settings.confmA% C°confmA% C°confmA% C°