ABB Tropos 6410 Installation Manual
                                                                | |
Contents
| 
Chapter 2 Tropos Routers Installation Guide, Models 6410 and 6420 26Wood Brace MountingYou can mount the pole bracket directly on a wood brace without using clamps, as shown inFigure 7.FIGURE 7 Wood Brace Mounting OptionMount the router on a wood pole1. Select a mounting location. You can attach the router to any wood brace.2. Attach the pole bracket to the wood brace with two 1/4-inch lag bolts that are at least 3 1/2inches in length, making sure that the wood brace is level.3. Attach the mounting bracket of the router to the pole bracket with two 5/16-inch machinescrews (refer to Figure 4 for the correct orientation):— Insert one screw through the hole at the top of the mounting bracket to the hole at the topof the pole bracket.— Insert the other screw through the curved slot track in the mounting bracket to the hole inthe middle of the pole bracket just above the clamp slot.4. Level the mounting bracket by rotating the unit along the curved slot tracks. Tighten thescrews.Woodbrace1/4” lag bolt3-1/2” minimum |
Related manuals for ABB Tropos 6410
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine