Chapter 2 Tropos Routers Installation Guide, Models 6410 and 6420 35Grounding the Data Protection DeviceThe grounding arrangement for an indoor data protection device is shown in Figure 13.Ground an indoor data protection device1. Place the protection device as close to the building entrance as possible.2. Connect a length of #10 AWG bare copper wire to the ground post on the data protectiondevice.3. Connect the other end of the grounding wire to the ground connection of an electrical outletor a grounded water pipe.FIGURE 13 Grounding the Indoor Network Protection Unit10 AWG wireto groundGrounding wireto elecrtical outlet groundor water pipeIndoor networkprotection unitTo networkData cable entersbuilding wallthrough conduitShielded RJ45 ports
