Chapter 3 Tropos Routers Installation Guide, Models 6410 and 6420 47Mount the BBU on a wood pole1. Secure the BBU mounting plate to the pole by threading a 1/4-inch bolt through the hole inthe clamp slot to the pole. The bolt should be at least 3 1/2 inches in length. Make sure thatthe bracket is level (Figure 20).2. Connect the PoE + LAN output cable from the BBU LAN output port to the MGT port onthe router.3. Attach the PoE input cable to the PoE input port.NoteWhen the PS079001 is remotely mounted, the data and power out cable supplied with the unit must bereplaced with an outdoor-rated Ethernet cable of sufficient length.FIGURE 20 Mounting the BBU on a Wood PoleBBU mountingplateBBUPoE inputfromPS079001Data and powerData inout (to 6420)
