Chapter 3 Tropos Routers Installation Guide, Models 6410 and 6420 42Remote mount the PS079001 on a metal pole1. Use the hose clamp to secure the pole bracket to the pole, as shown in Figure 4 on page 21.2. Secure the PS079001 mounting bracket to the pole bracket. Secure with two each 10-32screws (Figure 16).3. Connect the PoE + LAN output cable from the PS079001 LAN output port to the MGT porton the router.4. Attach the PoE input cable to the PoE input port.NoteWhen the PS079001 is remotely mounted, the data and power out cable supplied with the unit must bereplaced with an outdoor-rated Ethernet cable of sufficient length.FIGURE 16 Mounting the PS079001 on a Metal PolePS079001 mountingplateBBUData and AC powerinputData inpower out(to 6420or BB 063001)Pole bracket(requires pole mount kit)
