**PATENT No. 6,196,599 & 5,730,478USRC LCLASSIFIEDUc 2017 ABH Mfg., Inc.printed in USAwww.abhmfg.comE-mail: abhinfo@abhmfg.comArchitectural Builders Hardware Mfg., Inc.1222 Ardmore Ave., Itasca, IL 60143630.875.9900; FAX 800.9FAXABH (932.9224)ORREVISED 05-19-176100-1-10.DWG12 LATCH CAM211INSTALLATION INSTRUCTIONS:1. Door to be machined for standard 161 prep.2. Install latch (Item 12) using either #8 FHWS (Item 11) or 8-32 FHMS (Item 2) depending on door material type.3. 7DNHSXOOVLGHKDQGOHDVVHPEO\ ,WHP DQGURWDWHFDPSLQDVVKRZQLQ'HWDLO³$´DERYH3ODFHSXOOVLGHKDQGOHDVVHPEO\ ,WHPon pull side of door and slide the cam shaft through the latch cam on the latch.4. On the push side of the door, assemble the push side adapter plate (Item 6) to the sex bolts on the pull side handle assembly using(2) 10-32 FHMS (Item 5). Test pull handle for free movement of the latch bolt before installing push side handle assembly. If latchbolt does not extend or retract freely because of any type of binding, loosen screws (Item 5) to align adjustment of base assembliesand retighten screws one at a time while checking for proper latch retraction.5. 7DNHSXVKVLGHKDQGOHDVVHPEO\ ,WHP DQGURWDWHFDPSLQDVVKRZQLQ'HWDLO³$´DERYH$VVHPEOHWKHSXVKKDQGOHDVVHPEO\(Item 4) onto the push side adapter plate (Item 6) using (4) #10 star washers (Item 10) and (4) 10-32 pan head MS (Item 3) andengage push cam onto the pull side cam shaft.6. Test both handles for free movement of the latch bolt before tightening all screws. If latch bolt does not extend or retract freelybecause of any type of binding, loosen screws (Item 5) to align adjustment of base assemblies and retighten screws one at a timewhile checking for proper latch retraction.7. To prevent the handle assemblies from possible twisting, which in turn can cause binding, determine which staking screw hole willbe used for the push and the pull side handle assemblies (the staking screw installs on the staking screw hole location opposite thedirection the handle is mounted). Install (1) staking screw on each side using #12 PHSMS (Item 13).8. Install covers (Item 1) using 8-32 FHMS (Item 2).74 5692318102 3110SQUARE-OR-ROUNDCOVERCOVER#8 x 3/4" FHWS#10 STAR WASHERBACKSET LATCH10-32 x 1/2" OR 3/4" FHMS8-32 x 3/8" FHMS10-32 x 1/4" PAN HD. M.S.PUSH SIDE HANDLE ASSY10-32 SEX BOLTPUSH SIDE ADAPTER PLATEPULL SIDE ADAPTER PLATEPULL SIDE HANDLE ASSY8 2121112109 18622567113481ITEM1QTY2PART DESCRIPTION#12 x 1/2" PHSMS STAKING SCREWS13 2136100PAGE 1 OF 36100 SERIES INSTALLATION RETROFIT FOR 161 PREP(NO ADDITIONAL THRU BOLTS REQUIRED)DETAIL "A"NOTE:BEFORE MOUNTING PUSH AND PULLHANDLES, CAM PIN MUST BE ROTATEDTOWARDS SIDE INDICATED BY ARROWSTAMPED ON THE BASE.ALL PREP MOUNTING HOLESTO BE STRAIGHT & PARALLELTO ONE ANOTHER, THIS WILLHELP PREVENT ANY BINDINGOF MECHANICAL PARTS.NOTES1. TRIM CAN BE MOUNTED UP, DOWN, HORIZONTALLY OR VERTICALLY.2. USES STANDARD 161 DOOR PREP.3. VISION LITE MUST BE AT LEAST 6" FROM CENTERLINE OF TRIM.HORIZONTALBACKSETWITH 7"HANDLESBACKSETHANDLESHORIZONTALWITH 5" OR 7"DOWNHANDLESUPHANDLESPUSHPULLHANDLESMIXEDPULLPUSH**13CAM SHAFTCAM SHAFTSTAKING SCREW HOLESTAKING SCREW HOLE