ABH 6500 Series Installation Instructions Manual

ABH 6500 Series Installation Instructions Manual Manual pdf 1 page image

DETAIL BRO www.abhmfg.comE-mail: abhinfo@abhmfg.comArchitectural Builders Hardware Mfg., Inc.1222 Ardmore Ave., Itasca, IL 60143630.875.9900; FAX 800.9FAXABH (932.9224) c 2012 ABH Mfg., Inc.printed in USAINSTALLATION INSTRUCTIONS1. Prep door according to latch backset per template.2. Install latch (Item 1) using either wood or machine screws (Items 2 or 3) depending on door type.3. Take both base assemblies (Items 4 & 6) and rotate cam pin as shown in Detail “A” above. Placepull base over-ride assembly (Item 4) on pull side of door and slide the cam shaft through the latchcam. Place push base locking assembly (Item 6) on push side of door and engage push cam ontothe pull side cam shaft. Both privacy cam pins must be at the 12 o’clock position in order forthe privacy cam shafts to interlock as shown in Detail “B”. Check that they are interlockedproperly by rotating one privacy cam and making sure the other side is rotating at the same time.4. Fasten both side using (4) ¼-20 machine screws and lock nuts (Items 5 & 7). Test both handles forfree movement of the latch bolt before tightening all screws. If latch bolt does not extend or retractfreely because of any type of binding, loosen screws to align adjustment of base assemblies andretighten screws one at a time while checking for proper latch retraction. Mounting hardware (Items5 & 7) must be tightened before proceeding to next step.5. Place over-ride cover assembly (Item 8) on the pull side of the door making sure that the forks onthe inside of the cover engages the privacy cam and fasten with (2) 8-32 screws (Item 2).6. Repeat Step 5 with locking cover (Item 9) on the push side of the door.PARTS LISTDESCRIPTIONQTYITEMLATCH118-32 X 3/8" FHMS U/C62#8 X 3/4" FHWS23PULL BASE OVER-RIDE ASSY141/4-20 X 2-1/2" PH. TRUSS HD. M.S.45PUSH BASE LOCKING ASSY161/4-20 LOCKNUT47COVER ASSEMBLY (OVER-RIDE)18COVER ASSEMBLY (LOCKING)196500 PRIVACY LATCH-PUSH SIDE THUMBTURN LOCK6500-1-07.IDW6500REVISED 08-08-1212222925453776NOTE:BEFORE MOUNTING BASEASSEMBLIES, CAMS MUSTBE POSITIONED PER DRAWINGSHOWN IN DETAIL 'A'DETAIL 'A' LATCH CAMCAM SHAFT8FORKOVER-RIDE COVERLOCKING THUMBTURNPRIVACY PULLCAM SHAFT23PRIVACYCAM SHAFTSPRIVACY PUSHCAM SHAFTPRIVACYCAM PINS

/ 3

Related manuals for ABH 6500 Series