91KOOLMASTER PP-32 REV.018. USING THE CONFIGURATION MODULE8.1 Loading a ConfigurationLoading a Configuration from the ConfigurationModule into the PP-32 Controller:1- Position the configuration module on the J1connector, at the top left corner of theboard, with the components facing DOWN.2- Simultaneously press the up anddown-arrow keysduring a 5 second delay. Thefollowing message is displayed : “Load Configuration Press +/- to start”.3- Simultaneously press the +and- push buttons . Theconfiguration starts to load. Wait until it is completely loaded.4- Once the configuration has reached 100%, press the up and down-arrow keys once again simultaneously to exit thismenu.5- The new configuration is now loaded. Remove the configurationmodule from the connector.v$2g . 2CGE22
