ACP RMS A Series Owner's Manual

Also see for MMS A Series: Quick start guide

Contents

ACP RMS A Series Owner's Manual Manual pdf 6 page image

©2019 ACP, Inc.Cedar Rapids, IA 52404Page 6 of 11Part No. 20267601Original InstructionsElectronic Control OperationSo…how do I use it?Interrupting Operation (Pause Mode)While the oven is operating, press STOP/RESET key to interrupt operation.Display shows remaining cooking time. Close door and press START key toresume oven operation.Canceling MistakesIf oven is not cooking, press STOP/RESET key to clear display. If oven iscooking, press STOP/RESET key once to stop oven, then again to clear display.If oven door is open and time shows in display, close oven door and press STOP/RESET key to clear display.Manual Time Entry ModeTime entry mode allows the user to manually enter a cook time and power level.1. Open oven door and place food in oven. Close door.2. Press the TIME ENTRY key . “00:00” is displayed.3. Press Number Keys to enter the desired cook time.4. Press POWER LEVEL key , , or to select power level. LED willdisplay the related power. If the same key is pressed twice, the power will changeto PL10 (Power Level 10 or full power). If no power chosen, PL10 is default.5. Press START key to begin cooking. Oven begins cooking and the LEDdisplays cooking time.6. At the end of the cooking cycle, the oven beeps and LED displays “End”.Operating Preset Program KeysFrom the factory, this oven can of store up to 10 preprogrammed cooking sequencesin memory, for one key touch operation.1. Open oven door and place food in oven. Close door.2. Press a Number Key to run the Preset Program associated with that key. Ovenbegins cooking and the LED displays cooking time.3. At the end of the cooking cycle, the oven beeps and LED displays “End”.FACTORY PRESET PROGRAM SETTINGSNUMBER KEY TIME POWER1 10 sec.100%2 20 sec.3 30 sec.4 45 sec.5 1:00 min.6 1:30 min.7 2:00 min.8 3:00 min.9 4:00 min.0 5:00 min.*Note: Factory setting may vary by model(E)(D)(B)(A)(C)(F) (G)Note: Control panel coloring may vary bymodelControl Panel Features(A) LED DISPLAY(B) TIME ENTRY KEY(C) X2 KEY(D) POWER LEVEL KEYS(E) NUMBER KEYS /PRESET PROGRAM KEYS(F) STOP/RESET KEY(G) START KEYThe switching operation of this microwave oven can cause voltage fluctuations on the supply line. The operation of this oven under unfavorablevoltage supply conditions can have adverse effects. This device is intended for the connection to a power supply system with a maximumpermissible system impedance Zmax of 0.2 Ohms at the interface point of the user’s supply. The user has to ensure that this device is connectedonly to a power supply system which fulfills the requirement above. If necessary, the user can ask the public power supply company for thesystem impedance at the interface point.