ACR Electronics GLOBALFIX iPRO RLB-36 Product Support Manual

Also see for GlobalFix iPRO RLB-36: Product support manual

Contents

Y1-03-0233 Rev. F 18CAUTION: Keep this beacon a safe distance away from allmagnetic sources. Magnet safe distance is 4.6ft. or 1.4m, includingthe distance from stereo speakers.3. Category I bracketThe SeaShelter3™ Category I bracket has five pre-drilled screw holes touse for securing the bracket to a flat surface. Remove the SeaShelter3™lid by turning the spring loaded knob on the lid 1/4 turn counterclockwiseand pull. The lid will lift away from the top of the base and disengage atthe bottom of the base. The lid is tethered to the base to help preventloss. Pull the beacon with steady pressure from the bracket. It is notnecessary to remove the HydroFix™ Hydrostatic Release Unit (HRU) tomount the bracket using four of the holes. For extreme conditions a fifthhole is available when the HydroFix is removed and the ejector spring isdeployed. The bracket can be held in place to mark the placement of thescrew holes or you can use the mounting template provided. The use of#10 pan head stainless steel fasteners (minimum of ½” long) and ½”washers (not included) is recommended. Make sure that fasteners willnot contact any wires or plumbing before drilling pilot holes.