Y1-03-0233 Rev. F 36APPENDIX E - USER INTERFACE: DIGITAL DISPLAYDURING EXTENDED GPS TESTThe following chart describes the display and audio-visual feedback thebeacon provides during extended GPS Test. The messages on the digitaldisplay typically appear as one or two words at a time, until the entiremessage has been displayed.GlobalFix™ iPRO display, LED/ Audio Signaling and Description of OperationThe system informs you that the extended GPS test has initiated.The system reminds you that GPS data acquisition is optimized by giving the beacon a clearview of the sky.The system informs you that the beacon is in the process of performing the extended GPStest. This message repeats for approximately 100 seconds while the GPS is acquiring data.The system informs you that the beacon has passed the extended GPS test.This message appears if the extended GPS test has passed. The display indicates that theexternal GPS has updated its coordinates.The system provides the user with the GPS coordinates acquired during a successful test.Coordinates will scroll from right-to left.The system informs you that the beacon has failed the extended GPS test after 10 minutes.This message appears if extended GPS test failed. The system advises you to refer to thisProduct Support Manual (User Book) for information on what to do and who to contact.The system informs you that the extended test is complete, and that the system is enteringshut down.LONG GPS DATA TEST STARTGIVE CLEAR VIEW TO SKYGPS TESTNMEA GPS DATASEE USER BOOKTEST ENDLT: 26.03.033N LG: 80.10.066WGPS TEST √ long beepGNO GPS long beepR