13A C C E S S O R Y I N S T A L L A T I O NBARNDOORSPlease note: Barndoors are an optional accessory that must be purchased separately.1. Install and secure the includedmagnetic LED array cover. (Note:Not required when using Barn-doors)2. Place the Barndoor attachmentover the front of the unit. Alignand insert the 4 barndoor thumb-screws into the matching holeslocated on each side of unit (2 oneach side). Tighten the thumb-screws to secure the barndoors inplace. DO NOT overtighten.Barn Door InstallationBarn Doors32 Hex Panel IPLED Array Cover