ADJ 32 HEX PANEL IP User Manual

Also see for 32 HEX PANEL IP: User instructions

20S Y S T E M M E N UStatic Color Mode, Color Change Mode, and Color Fade Mode:1. Press the MODE button to access the main menu. Press the UP or DOWN buttons to scroll to“Menu Function” and press ENTER. Press the UP or DOWN buttons until ONE of the followingrunning modes is displayed:• “1. STATC” - Static Color Mode (Color adjustment and strobing)• “2. CHANG” - 15 Color Change Mode (Color changing, change speed adjustment, & strobing)• “3. CHANG” - 30 Color Change Mode (Color changing, change speed adjustment, & strobing)• “4. FADE” - Color Fade Mode (Color fading, fade speed adjustment, & strobing)2. Press the ENTER button to select your desired running mode. Use the UP and DOWN buttonsto make your desired adjustments. Press the ENTER button each time you are finished makingadjustments in the current running mode.Color Macro Mode:1. Press the MODE button to access the main menu. Press the UP or DOWN buttons until “MenuFunction” is displayed, and press ENTER.2. Press the UP or DOWN buttons until “Macros” is displayed and press ENTER.3. There are 64 colors to choose from. Use the UP and DOWN buttons for find your desired color.4. Once you have found your desired color, press the ENTER button. Press the MODE button to exit.LCD Display Settings:1. Press the MODE button to access the main menu. Press the UP or DOWN buttons until “MenuFunction” is displayed, and press ENTER.2. Press the UP or DOWN buttons until “LCD.Set” is displayed and press ENTER.3. Use the UP and DOWN buttons to scroll through the options, and press ENTER to make yourselection.• Backlight - Set how long the backlight display will stay on.• Key Lock - Control the key lock feature.- “OFF” - The keypad is unlocked, simply press the MODE button to activate the keypad.- “ON” - This is a simple keypad lock. “LOCKED *****” will be displayed. Press and hold theMODE button for at least 5 seconds to unlock the keypad.- “ON1” - This setting is used to prevent the accidental unlocking of the keypad. To unlockthe keypad you will have to enter a passcode. “LOCKED *****” will be displayed. To unlockthe keypad press UP, DOWN, UP, DOWN, & ENTER in that order.• DisFlash - In this function you can activate the display flash.Default Running Mode:In this mode you can reset all function settings to their default modes.1. Press the MODE button to access the main menu. Press the UP or DOWN buttons until “MenuFunction” is displayed and press ENTER.2. Press the UP or DOWN buttons until “DFSET” displayed, and press ENTER.3. Use the UP or DOWN button to toggle between “ON’ and “OFF”. To reset to the default settings,select “ON” and press ENTER.