ADJ 32 HEX PANEL IP User Manual

Also see for 32 HEX PANEL IP: User instructions

31P R I M A R Y- S E C O N D A R Y C O N F I G U R AT I O NThis function will allows units to be linked together to run in a Primary-Secondary set-up, where oneunit will act as the controlling unit and the others will react to the controlling unit’s built-in programs.Any unit can act as a Primary or as a Secondary, but only one unit in a linked system can be pro-grammed to act as the Primary.Primary-Secondary Connections and Settings:1. Daisy chain your units via the XLR connector on the rear of each unit. Use standard XLR datacables to link your units together. Remember that the male XLR connector is the input and thefemale XLR connector is the output. The first unit in the chain (primary) will use the female XLRconnector only, and the last unit in the chain will use the male XLR connector only.2. Connect the first “Secondary” unit to the “Primary.”3. Set the “Primary” unit to your desired mode of operation. On the “Secondary” unit(s) press theMODE button and press the UP or DOWN buttons until “Secondary” is displayed and press EN-TER.4. The Secondary unit(s) will now follow the Primary unit.P I X E L Z O N E S1 11 12 22 23 33 34 44 45 55 58 88 87 77 76 66 6