ADJ ELECTRAPIX BAR 8 User Manual

14I N S T A L L A T I O N G U I D E L I N E SCLAMP MOUNTINGWhen mounting the fixture to a truss or any other suspended structure, attach an appropriately ratedmounting clamp to an L-track adapter using the appropriate fastener, then insert the L-tack adapterinto the desired L-track rail on the fixture. Slide the mounting clamp and adapter to the desiredposition along the L-track rail, then tighten the knob on the L-track adapter to secure in position.Additionally, a safety cable of the appropriate weight rating should be secured through the each safetycable loops located along the edge of the fixture. Please note that TWO mounting clamps andTWO safety cables are required to mount this unit in a safe and secure manner.SAFETY CABLE:ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTUREIN A SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL NOTFALL IF THE CLAMP FAILS.MOUNTINGCLAMPL-TRACKADAPTERMOUNTINGCLAMPL-TRACKADAPTERSAFETYCABLEATTACHMENTPOINTSL-TRACKRAILS