ADJ ELECTRAPIX BAR 8 User Manual

16I N S T A L L A T I O N G U I D E L I N E SThe unit is fully operational in three different mounting positions: hanging upside-down from the ceil-ing or trussing, sideways on trussing, or set on a flat level surface. Be sure this fixture is kept at least12m (40ft) away from any flammable materials (decorations, etc). Always use and install a safetycable (not included) as a safety measure to prevent accidental damage and/or injury in the event theclamp fails. Never use the carrying handles for secondary attachment.ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN ASUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL NOT FALL IFTHE CLAMP FAILS.FALLING FIXTURES CAN CAUSE SEVERE INJURY OR SERIOUS EQUIPMENTDAMAGE! FOR THIS REASON, FIXTURES SHOULD BE INSTALLED AND INSPECTEDONLY BY QUALIFIED PERSONNEL. DO NOT INSTALL THE UNIT IF YOU LACK THEQUALIFICATIONS TO DO SO, OR IF YOU HAVE DOUBTS ABOUT THE SAFETY ANDSECURITY OF THE INSTALLATION SETUP OR LOCATION!