28S Y S T E M M E N UINFORMATION(continued)Error LogsFixture Errors Lists last 10 error codesReset Error Log Yes / NoPasscode = 050 Clear error logSoftware Version Vx.xx Current software versionLAMP CONTROLLamp On / Off On / Off Lamp on/offLamps On withPower On / Off Switch lamp on automaticallywhen fixture is powered onLamp On via DMX On / Off Lamp power on via DMXcontrolLamp Off via DMX On / Off Lamp power off via DMXcontrolNotes:1. Current Maximum Temperature - Maximum fixture temp. that has been recorded, before reset andafter reset.2. Maximum Temperature - Overall maximum fixture temp. that has been recorded. (Not Resettable)3. DMX Value options depend on the DMX Channel mode the fixture is set to.

ADJ HYDRO BEAM X1 User Manual

Introduction

Safety Guidelines

Overview

Discharge Lamp Warning

Lamp Installation

Torque Settings & IP Tester

Screw Locations

Fixture Installation

Connections

DMX Addressing

DMX Channel Modes

Gobos

System Menu

WiFly Control

Error Codes

Dimensional Drawings

Updating the Software

Limited Warranty (USA Only)

Technical Specifications

HYDRO BEAM X1