ADJ Stinger Gobo User Instructions

ADJ Products, LLC - www.adj.com - Stinger Gobo Instruction Manual Page 12 ADJ Products, LLC - www.adj.com - Stinger Gobo Instruction Manual Page 13System Menu: When making adjustments press ENTER toconfirm your setup then press and hold the MENU buttonfor at least 3 seconds. To exit without making any adjust-ments press the MENU button. The display will lock after 30seconds, press the MENU button for 3 seconds to unlock.ADDR - DMX Address Setting.1. Press the either the MENU, UP, or DOWN buttons until “ADDR” isdisplayed, press ENTER.2. The current address will now be displayed and flashing. Press theUP or DOWN buttons to find your desired address. Press ENTER toset your desired DMX address.CHND - This will let select your desired DMX channelmode.1. Press the MENU button until “CHND” is displayed, press ENTER.The current DMX channel mode will be displayed2. Press the UP or DOWN buttons to find your desired DMX channelmode and press ENTER to confim and exit.SHND - Show modes 0-6 (Factory programs).1. Press the MENU button until “SHND” is displayed, press ENTER.2. “Sh X” will now be displayed, “X” representing a number between0-6. Shows 1-6 are factory programs, while show “0” is random mode.Use the UP or DOWN buttons to find your desired show.3. When you have found your desired show press ENTER, then pressand hold the MENU button for at least 3 seconds to activate. Afteryou have set your desired show, it can be changed at any time usingthe UP or DOWN buttons.SPEE - Show mode speed.1. Press the MENU button until “SPEE” is displayed, press ENTER.Stinger Gobo System MenuStinger Gobo System Menu