ADJ Stinger Gobo User Instructions

ADJ Products, LLC - www.adj.com - Stinger Gobo Instruction Manual Page 16 ADJ Products, LLC - www.adj.com - Stinger Gobo Instruction Manual Page 17Universal DMX Control: This function allows you to use a univer-sal DMX-512 controller to control the patterns, rotation and strobing.A DMX controller allows you to create unique programs tailored toyour individual needs.1. The Stinger Gobo is a 2 DMX channel modes; a 2 channel modeand 14 channel mod. See pages 20-22 for detailed description ofthe DMX values and traits.2. To control your fixture in DMX mode, follow the set-up procedureson pages 7-9 as well as the set-up specifications that areincluded with your DMX controller.3. Follow the instructions on page 13 to select your desired DMXchannel mode and set the DMX address.4. For longer cable runs (more than a 100 feet) use a terminator onthe last fixture.5. For help operating in DMX mode consult the manual includedwith your DMX controller.Sound Active Mode: This mode allows a single unit or several unitslinked together, to run to the beat of the music.1. Press the MENU button until “Soun” is displayed, and pressENTER.2. Press the UP or DOWN buttons to either activate sound activemode or deactivate, and press ENTER. The unit will now run tothe beat of the music.3. The sound sensitivity can be adjusted by pressing the MENUbutton until “Sose” is displayed, and then press ENTER. Use theUP or DOWN buttons to adjust the sound sensitivity, 0 being theleast sensitive, and 100 being the most sensitive.Show Mode: This mode allows a single unit or several units linkedtogether, to run 1 of 6 built-in shows.1. Press the MENU button until “Shnd” is displayed, and pressENTER.2. Press the UP or DOWN buttons to find your desired show andpress ENTER. The unit will now run your chosen built-in program.3. The show running speed can be adjusted by pressing the MENUbutton until “SPEE” is displayed, and then press ENTER. Use theUP or DOWN buttons to adjust the sound sensitivity, 0 being theslowest, and 100 being the fastest running speed.Stinger Gobo OperationStinger Gobo System Menu2. Use the UP or DOWN buttons to either activate strobing or deacti-vate it.TEST - This function will run a self test program.1. Press the MENU button until “TEST” is displayed, press ENTER.2. The fixture will now run a self test.DISP - This function will reverse the display 180º.1. Press the MENU button until “DISP” is displayed, press ENTER.2. Press ENTER to “flip” the display. Press ENTER to “flip” it again.Press ENTER when you have made your desired setup.3. Press ENTER to confirm. To make you LED display reappear againpress any button.FHRS - With this function you can display the runningtime of the unit.1. Press the MENU button until “FHRS” is displayed, press ENTER.2. The running time of the fixture will now be displayed. Press MENUto exit.VER - Use this function to display the Software version ofthe unit.1. Press the either the MENU button until “VER” is displayed, pressENTER.2. The display will show the software version.RSET - This function will reset the unit.1. Press the MENU button until “RSET” is displayed. Press theENTER button and the unit will reset itself.