ADLINK Technology NuPRO-590 Series User Manual

ADLINK Technology NuPRO-590 Series User Manual Manual pdf 48 page image

40 • Bios ConfigurationOS Select for DRAM > 64MBThis option allows the system to access greater than 64MB of DRAM memorywhen used with OS/2 that depends on certain BIOS calls to access memory.The default setting is Non-OS/2.Video BIOS ShadowThis item allows you to change the Video BIOS location from ROM to RAM.Video Shadow will increase the video speed.Enabled Video shadow is enabledDisabled Video shadow is disabledC8000 - CBFFF Shadow/DC000 - DFFFF ShadowShadowing a ROM reduces the memory available between 640KB to1024KB. These fields determine whether optional ROM will be copied toRAM or not.Enabled Optional shadow is enabledDisabled Optional shadow is disabledChipset Features SetupThis Setup menu controls the configuration of the chipset.ROM PCI/ISA BIOSCHIPSET FEATURES SETUPAWARD SOFTWARE INC.*Auto Configuration : Disabled Power-Supply Type : AT: Spread Spectrum : Disabled*DRAM Leadoff Timing : 11/7/3 Case Open_Warning : Enabled*DRAM Read Burst (EDO/FP) : X444/x444 CPU Warning Temperature : Disabled*DRAM Write Burst Timing : X444 Current System Temp. : 60°C/140°F*Fast EDO Lead Off : Disabled Current CPU1 Temperature :*Refresh RAS# Assertion : 5 Clks Current CPUFAN1 Speed :*Fast RAS To CAS Delay : 3 VCORE :*DRAM Page Idle Timer : 2 Clks 3.3 V : + 5 V :*DRAM Enhanced Paging : Enabled +12V : - 12 V : -*Fast MA to RAS# Delay : 2 Clks Shutdown Temperature : 60°C/140°F*SDRAM(CAS Lat/RAS-to-CAS) : 2/2*SDRAM Speculative Read : DisabledSystem BIOS Cacheable : DisabledVideo BIOS Cacheable : Disabled8 Bit I/O Recovery Time : NA ESC : Quit · ‚ ‡ fl : Select Item16 Bit I/O Recovery Time : NA F1 : Help PU/PD/+/- : ModifyMemory Hole At 15M-16M : Disabled F5 : Old Values (Shift) F2 : ColorPCI 2.1 Compliance : Disabled F6 : Load BIOS DefaultsAuto Detect DIMM/PCI Clk : Enabled F7 : Load Setup Defaults