ADLINK Technology NuPRO-590 Series User Manual

ADLINK Technology NuPRO-590 Series User Manual Manual pdf 51 page image

Bios Configuration • 43Current CPU Fan SpeedThese read-only fields show the current speeds in RPM (revolution perminute) for the CPU fan and chassis fan as monitored by the hardwaremonitoring IC.VCORE/3.3V/+12V/-12V/+5VThese read-only fields show the current voltages in the voltage regulatorsand power supply as monitored by the hardware monitoring IC.Shutdown TemperatureThis field allows you to set the temperature at which the system automaticallyshuts down once it is reached, in order to avoid damage to systemcomponents.Power Management SetupThe Power Management Setup allows you to save energy of your systemeffectively. It will shut down the hard disk and turn off video display after aperiod of inactivity.ROM PCI/ISA BIOSPOWER MANAGEMENT SETUPAWARD SOFTWARE, INC.ACPI Function : Enabled ** Reload Global Timer Events **Power Management : User Define IRQ3 (3-7, 9-15), NMI : DisabledPM Control by APM : Yes Primary IDE 0 : EnabledVideo Off Method : V/H SYNC +Blank Primary IDE 1 : EnabledVideo Off After : Standby Secondary IDE 0 : DisabledModem Use IRQ : 3 Secondary IDE 1 : DisabledDoze Mode : Disabled Floppy Disk : DisabledStandby Mode : Disabled Serial Port : EnabledSuspend Mode : Disabled Parallel Port : DisabledHDD Power Down : DisabledThrottle Duty Cycle : 62.5% Panel Type Selectable : PANEL-5ZZ Active in Suspend : DisabledPCI/VGA Active Monitor : DisabledSoft-Off by PWR-BTTN : Instant-OffCPUFAN Off In Suspend : DisabledPowerOn by Ring : Disabled ESC : Quit · ‚ ‡ fl : Select ItemWake Up On LAN : Disabled F1 : Help PU/PD/+/- : ModifyIRQ 8 Break Suspend : Disabled F5 : Old Values (Shift) F2 : ColorF6 : Load BIOS DefaultsF7 : Load Setup DefaultsACPI functionACPI stands for Advanced Configuration Power Interface. The default settingof this field Disabled.