ADLINK Technology NuPRO-590 Series User Manual

ADLINK Technology NuPRO-590 Series User Manual Manual pdf 58 page image

50 • Bios Configuration♦ PNP/PCI ConfigurationThis option configures the PCI bus system. All PCI bus systems onthe system use INT#, thus all installed PCI boards must be set to thisvalue.ROM PCI/ISA BIOSPNP/PCI CONFIGURATIONAWARD SOFTWARE INC.PNP OS Installed : No PCI IDE IRQ Map To : PCI-AUTOResources Controlled by : Manual Primary IDE INT# : AReset Configuration Data : Disabled Secondary IDE INT# : BIRQ-3 assigned to : Legacy ISA Used MEM base addr : N/AIRQ-4 assigned to : Legacy ISAIRQ-5 assigned to : PCI/ISA PnPIRQ-7 assigned to : Legacy ISAIRQ-9 assigned to : PCI/ISA PnPIRQ-10 assigned to : PCI/ISA PnPIRQ-11 assigned to : PCI/ISA PnPIRQ-12 assigned to : PCI/ISA PnPIRQ-14 assigned to : PCI/ISA PnPIRQ-15 assigned to : PCI/ISA PnPDMA-0 assigned to : PCI/ISA PnPDMA-1 assigned to : PCI/ISA PnP ESC : Quit · ‚ fl : Select ItemDMA-3 assigned to : PCI/ISA PnP F1 : Help PU/PD/+/- : ModifyDMA-5 assigned to : PCI/ISA PnP F5 : Old Values (Shift) F2 : ColorDMA-6 assigned to : PCI/ISA PnP F6 : Load BIOS DefaultsDMA-7 assigned to : PCI/ISA PnP F7 : Load Setup DefaultsPNP OS InstalledThis field allows you to specify if the operating system installed in yoursystem is plug and play aware.Note: Operating systems such as DOS, OS/2, and Windows 3.x do not usePnP.Yes Operating system supports PnP deviceNo Operating system doesn’t support PnP deviceResources Controlled byThis PnP BIOS can configure all of the boot and compatible devicesautomatically. However, this capability needs you to use a PnP operatingsystem such as Windows 95.AutoPnP BIOS configure all compatible devicesautomaticallyManual User can assign IRQ & DMA to the devices