ADT Network Camera User Manual
                                                   | |
Contents
| 
User’s Manual4Chapter 2 — Installation2.1 Package Contents Network Camera Installation CD (INIT, RASplus and iNEX Basic software, camera, RASplus and iNEXBasic User’s Manual) User’s Manuals (Camera Installation Guide, INIT) SD Memory Card Mount Kits2.2 Illustrated Parts ListDome Cover Body① Dome Cover Screw Hole: Allows you to connect the dome cover to the body.② Power LED: Indicates system operation status. See Appendix – LED Indicators for details.③ Lens: Fixed focus lens is installed.④ IR LED: The sensor in the middle of IR LEDs senses illumination and the IR LEDs are lit atnight or under low lighting conditions.⑤ Rotation Base: Allows you to adjust the rotation angle.⑥ Tilt Base: Allows you to adjust the tilt angle.⑦ Pan Base: Allows you to adjust the pan angle.⑧ Wall/Ceiling Mounting Holes: Allows you to screw the camera to the wall or ceiling.⑨ RESET (Factory Reset Switch): Use to return all settings to the original factory settings.See below for details.⑩ SD/SDHC (SD Memory Card Slot): Insert an SD memory card (SanDisk or Transcendbrands recommended). |
Related manuals for ADT Network Camera
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine