ADT Network Camera User Manual

ADT Network Camera User Manual Manual pdf 20 page image

User’s Manual14DVRNSCheck the DVR Name Service box to use the DVRNS function. DVRNS Server: Enter the IP address or domain name of the DVRNS server. Port: Set up the port number of the DVRNS server. Use NAT: Check the box when the camera uses a NAT (Network Address Translation)device for network connection. Camera Name: Enter the camera name to be registered on the DVRNS server. Checkwhether or not the name is available by clicking the Check button. Help Desk: Choosing the OK button registers the camera on the DVRNS server. ProperDVRNS settings will display the help desk information of the DVRNS server.NOTES: The DVRNS (DVR Name Service) function allows the camera to use dynamic IPaddresses for remote connection. When using this function, you can access the cameraremotely by using the camera name instead of its IP address. For the DVRNS functionto work properly, the camera should be registered on the DVRNS server, and the DVRNSserver settings in the INIT program for the camera should match the settings registeredon the DVRNS server. Any changes on the DVRNS server might cause improperoperation. When LAN settings are changed, set up the DVRNS settings after saving your LANchanges by clicking the OK button. You will need to get the IP address or domain name of the DVRNS server from yournetwork administrator. You can use the domain name instead of IP address if you setup the DNS server during the IP Address setup.