ADT Network Camera User Manual

ADT Network Camera User Manual Manual pdf 27 page image

Network Camera21 Noise Filter: Set the degree of the noise filtration. This adjustment can be used to decreasenoise in low light conditions. The higher the value is set, the less the noise there is.However, too high of a setting might cause overall image blurring. Anti-Flicker: Set to the same frequency as the lighting when the AC power is used for thelighting such as a fluorescent lights. This reduces video flicker caused by the frequencydifferences (60 Hz for NTSC, 50 Hz for PAL). White Balance− Auto: Select to adjust the white balance automatically. The system identifies the light sourceof where the camera is installed and sets up the proper white balance for the conditions.− Manual: Select to adjust the white balance manually. Adjust the Red and Blue gain. Thehigher the value, the stronger the color is.NOTE: Selecting Auto for some functions sets up the functions automatically based onthe conditions.Streaming Primary, Secondary: The camera supports dual stream video. The secondary streamsetting is dependent on the primary stream setting. In the dual stream mode, some eventactions (FTP upload and image attachment to Emails) are disabled. Stream: Select the stream usage.− Live/Recording: Allows simultaneous live monitoring and recording. This is supportedonly in one of the streams.− Live: Allows live monitoring only. Compression: Set up the compression of images for streaming. The primary streamsupports only H.264 compression.