Chapter 6. Configuration50 ISU 2x64 Dual Port ISDN Service Unit User Manual 61200051L1-1DDTE Options for Asynchronous and Synchronous OperationThe DTE options are configured separately for both DTE#1 andDTE#2. When using the front panel, select the appropriate DTEwith either arrow key and press Enter. (See Figure 6-16 and 6-17.)When using the VT 100 terminal select the option number corre-sponding to the appropriate DTE and press Return.Ensure the DTE equipment is set for asynchronous operation before at-tempting to make an asynchronous call. Failure to do so causes the callattempt to fail.Figure 6-16Asynchronous DTE Options Menu TreeFigure 6-17Synchronous DTE Options Menu Tree3=CONFIG1=Netw. options2=DTE options3=Protocol4=Quick setup5=Security6=Remote Config1=Bit Rate2=Connector Type3=RTS Options4=CTS Options5=CD Options6=DTR Options7=DSR Options8=Flow Control9=Data Format1=Asynchronous2=Synchronous3=CONFIG1=Netw. options2=DTE options3=Protocol4=Quick setup5=Security6=Remote Config1=Bit Rate2=Connector Type3=RTS Options4=CTS Options5=CD Options6=DTR Options7=DSR Options8=Transmit Clock1=Asynchronous2=Synchronous
