ADTRAN 12804108L1A System Manual

Section 3 Engineering Guidelines TRACER 4108/4208 System Manual32 © 2003 ADTRAN, Inc. 612804208L1-1BFuseThe fuse holder, accessible from the rear panel of the TRACER 4108/4208, accepts a generic 2 A, 250 V,2-inch slow-blo fuse.Antenna Interface (N-Type connector)The ANTENNA interface (N-Type connector) connects to the customer-supplied antenna using standardantenna feedline cable. When determining the cable specifications for your application, refer to Section 2,Microwave Path Engineering Basics (System Losses (L) on page 18) for a discussion on cable length andloss factors.5. AT-A-GLANCE SPECIFICATIONSThe following is a list of specifications for the TRACER 4108/4208 system.Table 8. DC Power Connector PinoutPIN NAME + Voltage – Voltage1 - Ground (GND) – Voltage2 + + Voltage Ground (GND)Table 9. At-A-Glance SpecificationsHardware Description SpecificationTransmitterOutput Power +20 dBm, maxFrequency Range 2400 to 2483.5 MHz (TRACER 4108)5725 to 5850 MHz (TRACER 4208)ReceiverReceive Level, Minimum TRACER 4108-90 dBm @ 8xT1, -93 dBm @ 4xT1, -97 dBm @ 2xT1TRACER 4208-85 dBm @ 8xT1, -89 dBm @ 4xT1, -92 dBm @ 2xT1Receive Level, Maximum -30 dBmReceive Level, Nominal -55 dBmFrequency PlanPlan AChannelPlan1 Tx 2.416 GHz, Rx 2.456 GHz (TRACER 4108)Tx 5.742 GHz, Rx 5.822 GHz (TRACER 4208)2 Tx 2.422 GHz, Rx 2.462 GHz (TRACER 4108)Tx 5.747 GHz, Rx 5.827 GHz (TRACER 4208)3 Tx 2.428 GHz, Rx 2.468 GHz (TRACER 4108)Tx 5.753 GHz, Rx 5.833 GHz (TRACER 4208)